To increase pH, use 1 teaspoon (6 g) for every 80 L (20 gallons) daily until desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale™.
In order to adjust pH gradually, use Alkaline Buffer™ with Acid Buffer™. When using Alkaline Buffer™ & Acid Buffer™ together to target a specific pH, utilize the suggested ratio chart.
This chart is based on use in RO or RO/DI water and ratios may need to be adjusted for use in tap water.
HINT: First determine the amount of Alkaline Buffer™ needed for the volume of water. This should be determined based upon your desired alkalinity (KH). Then, divide by the number in the middle column to obtain the correct amount of Acid Buffer™ required.
Alkaline Buffer™ Dosing Tables
The following table gives the recommended doses for various water volumes to increase the KH by 2.8 dKH. Dosing Alkaline Buffer alone will target a pH of above 7.6. To target a lower pH, use together with Acid Buffer (consult attached dosing chart)
| Water Volume | 1 qt / 1 L | 1 gal / 4 L | 10 gal / 40 L | 50 gal / 200 L |
|
Dose (g) |
0.1 g |
0.3 g |
3 g |
15 g |
|
Dose (tsp) |
1/80 tsp |
1/20 tsp |
1/2 tsp |
2 1/2 tsp |
0 Comments